Synergistic inverter welder DIGIMIG 200 MTM

The synergistic DIGIMIG 200 MTM welder is a device for manual welding of steel and non-ferrous metals using the MIG / MAG, MMA (coated electrode) and TIG HF methods. The device is aimed at professionals who value high quality and reliability. It can also be used for braze welding of thin (up to 3 mm) galvanized sheets.
Digital control allows for full adjustment of parameters, arc dynamics, characteristics and manual or synergic operating mode in the MIG / MAG method. The use of synergic settings in the welder for ordinary steel, stainless steel and aluminum alloys significantly simplifies its operation and allows it to be used by people with less experience and hobbyists.

During MMA welding, you can adjust the HOT START and ARC FORCE functions and turn off VRD.

The welder allows the use of several operating modes, including the option of spot welding. The device has the memory of the last setting, i.e. after turning it off and on again, the last set parameters are restored. It is also possible to save 10 sets of settings with easy access to program save / restore mode.

The set includes a MIG torch, a TIG torch with ionization ignition, a ground cable and an electrode cable.

TECHNICAL DATA:

Catalog number: 7812680
Supply voltage [V]: AC 230 50Hz
Welding methods: MIG, MMA, Lift TIG, braze welding, TIG HF, TIG LIFT, MMA
Manufacturing technology: IGBT
Welding current [A]: MIG: 200 MMA: 180 TIG: 200
Duty cycle [%]: 60
Max. current consumption [A]: 33 (MIG) / 33 (MMA) / 24 (TIG)
Max. power consumption [kVA]: 7.4
Welding current control: Smooth
Wed spool with wire [mm]: 100, 200
Speed wire feed [m / min]: ---
Weight [kg]: 11.5
Dimensions (L x W x H) [mm]: 420 x 200 x 375

Functions:

Digital control,
HF,
Arc Force,
Hot Start,
2T / 4T,
VRD,
Rising current,
Current drop,
Inductance regulation,
Pulse,
Adjustment of gas pre-flow and post-flow time,
Welding without gas,
2-roll feeder,
Settings memory,
Manual MIG,
Synergic MIG,
Welding without gas,
Spot welding