The MIG 351M welder is the second generation equipment made in IGBT technology.

It is used for manual welding of steel and non-ferrous metals in a protective gas shield (MIG / MAG method) and with a coated electrode (MMA method). It can also be used for gasless welding with flux cored wire. The device also has the option of welding with wires with a spool diameter of 100mm using the Spoolgun holder.

The welder is powered by three-phase voltage 3x400V. It is equipped with a professional 4-roll wire feeder with smooth regulation of the feed speed. It also has a smooth adjustment of the welding voltage in MIG / MAG welding, and the welding current in the MMA method. The device is equipped with a gas delay control, a 2T / 4T switch and an inductance control useful for welding thin sheets.

They are protected against overload by a thermal protection. Works with K-200 (5 kg) and K-300 (15) kg wire spools.

The set includes a 4m long MIG TW-36 torch, electrode cable, ground cable with a clamp and a welding shield with a hammer and a brush.

TECHNICAL DATA:     • Catalogue code: SINW-MIG351M     • Supply voltage [V]: AC 3x400 50Hz     • Welding methods: MIG, MMA     • The technology: IGBT     • Welding current [A]: 350     • Duty cyclle [%]: 60     • Max. current consumption [A]: 19.5 (MIG) / 20.5 (MMA)     • Max. power consumption [KVA]: 14.7     • Adjust welding current: Liquid     • Wed spool with wire [mm]: 200, 300     • Weight [kg]: 60     • Dimensions (D x W x H) [mm]:  930 x 435 x 695     • Functions:  2T / 4T, Inductance adjustment, 4-roll feeder, Spool Gun option

Equipment:

•     Sherman MIG 351M/4R

•     Welding holder Tecweld TW-36 / 4m

•     Electrode cable

•     Mass cable

•     Manual in Polish, English version available on request

•     Warranty card (2 years for end customers / 1 year for businesses)